HYDEN-HYDRAULIC OIL ISO 32
MAG HYDEN Hydraulic helps energy conserving in pump start-up mode while providing improved load protection to reduce wear during pump operation. The high viscosity index makes these products lighter and more energy efficient at room with high temperatures and high loads operating. The stabilized formula of HYDEN provides a heavier, more protective and full fluid film viscosity. HYDEN Hydraulic oil provides the highest level of quality performance in a wide variety of transportation and stationary type equipment operating in broad ranges of environmental conditions and which operating under severe conditions. It prevents rusting and corrosion. Recommended for use in hydraulic systems where low toxicity, high flashpoint and biodegradability properties are required or desired.
Download
- Gain substantial performance enhancements in Hydraulic Power.
- Systems Cleaner servo valves, less chances for sticking.
- This hydraulic oil also has excellent water separation and anti-foaming properties incase water is getting into circuit.
- Reduce overall impact and footprint on the environment.
- Offers outstanding rust and corrosion prevention and oxidation stability which increases equipment's life.
- Lower toxic exposures to workers.
- Superior filterability increases filter life.
- Multi-metal compatibility under wet and dry conditions.
BENEFITS
Specification
Sperry Vickers, Demison HF-1, Lucas, AFNOR NFE 48-603, US Steel 127,136
- DIN 51524 Part III HLVP
Performance Level
- Cleaner servo valves, less chances for sticking.
- Superior thermal stability, avoid the formation of sludge even at high temperature.
- Superior filterability increases filter life.
- Multi- metal compatibility under wet and dry conditions.
- Good demusibility ensuring rapid water separation in the case of water getting into the circuit.
- Excellent protection against rust and corrosion insuring maximum equipment life.
- Rapid air release property minimizes chances of pump cavitation leading troubles for operations.
Additional Quality Features
Application Of Use
MAG HYDEN HVI ISO 32 Hydraulic Oil is recommended for all mobile and stationary hydraulic system operating under severe conditions, it’s also can be used in circulation, splash and ring oil Lubricants system, compressors where recommended
Typical Technical Properties
| PHYSICAL CHARACTERISTICS | TEST METHOD | TYPICAL VALUE |
|---|---|---|
ISO Grade | Visual | ISO 32 |
Appearance | Bright & Clear | |
Density @ 15 °C, kg/L | ASTM D-1298 | 0.872 |
Kinematic Viscosity, cST | ||
AT 40 °C cst | ASTM D-445 | 32.5 |
AT 100 °C cst | ASTM D-445 | 6.5 |
Viscosity Index | ASTM D-2270 | 160 |
Demulsibility @ 54 °C | ASTM 1401 | 15 |
Flash Point, COC, °C | ASTM D-92 | 210 |
Pour Point, °C | ASTM D-97 | -39 |
TAN, mg KOH/g | ASTM D-974 | 0.3 |
D-1298,B&C B&C B&C B&C B&C B&C |
205 Ltr. DX III ATF20503
205 Ltr. DX III ATF20503