GP Global MAG LLC develops high performance lubricants, fluids and coolants.

PRODUCTS

Tornado Series Premium Air Compressor Oil

MAG Tornado Series, These products are a range of premium quality, low carbon forming
compressor oils. Lubricants for compressors very dependent upon the type of
compressor e.g. reciprocating, rotary, screw and also the gas being compressed e.g. air,
nitrogen and refrigerants etc. With these features firmly in mind the range of compressor oils
have been designed for a wide range of manufacturers specifications and requirements. This
range of compressor oils are manufactured using carefully selected mineral oils. Inhibitors are
added to control oxidation, a problem encountered in the high temperature areas of the
discharge zones and anti-wear to protect all the mechanical parts in a compressor.

Download
Tornado Series Premium Air Compressor Oil

    BENEFITS

  • High oxidation stability.
  • Good thermal stability.
  • No sludge formation.
  • Very low acid number.
  • Good demulsifying behavior.
  • Good foam behavior.

    Performance Level

  • DIN 51506 VBL, VCL, VDL
  • ISO/DP 6521 DAA, DAB, DAH, DAG

    Application Of Use

    MAG Tornado Series, ISO 32 and ISO 46 are recommended for the lubrication of screw type compressors. ISO 68 and ISO 100 are recommended for the lubrication of reciprocating (piston) type compressors. Both ISO 68 and 100 can be used in sliding vane applications were oils of these viscosities are required. ISO 150 is suitable for the lubrication of sliding vane compressors. It is vitally important when selecting the required lubricant that the equipment manufacturers recommendation is adhered to. A 2000-hours drain period is customary with this type of lubricants range under service temperatures up to 150°C. It is vitally important when selecting the required lubricant that the equipment manufacturers recommendation is adhered to. Always comply with the manufacturers drain periods. PLEASE DON’T USE THESE PRODUCTS IN BREATHING AIR COMPRESSORS OR MEDICAL EQUIPMENT.

Typical Technical Properties

TEST DESCRIPTION METHODUNIT TS32TS46TS68TS100TS150

Density @ 25°C

ASTM D 4052

g/cc

0.850

0.856

0.862

0.870

0.880

Kinematic Viscosity @ 40⁰C

ASTM D 7042

cSt

32.1

46.5

68.2

99.3

151.0

Kinematic Viscosity @100⁰C

ASTM D 7042

cSt

5.5

7.0

9.0

11.75

15.30

Viscosity Index

ASTM D 2270

107

107

106

105

102

Pour Point

ASTM D 6749

⁰C

-39

-39

-39

-36

-30

Flash Point (COC)

ASTM D 92

⁰C

228

240

248

252

258

Demulsibility @ 54⁰C (82⁰C)

ASTM D 1401

Minutes

5

7

9

(8)

(9)

Foaming Sequence I

ASTM D 892

ml / ml

10 / 0

10 / 0

10 / 0

10 / 0

10/0

Foaming Sequence II

ASTM D 892

ml / ml

20 / 0

20 / 0

20 / 0

20 / 0

20/0

Foaming Sequence III

ASTM D 892

ml / ml

10 / 0

10 / 0

10 / 0

10 / 0

10/0

Acid Value – TAN

ASTM D 974

mg KOH/g

0.1

0.1

0.1

0.1

0.15

Back